Power Supply 9A/ 14V/ 126W (18 Puls)

9 Amp, 14 Volt Power Supply.

Suitable for running up to 18 Pulsators (0.5 amp per pulsator 0.25 amp per solenoid)

For use with:

• Transformer 17V - 613618

---

Features;

• Amp 100 V Rectifier
• Transformer 17 V 12 Amp
• Positive and Negative Output and Earth Terminals
• Switch DPST 3 A 250 V 
• Cable Gland for Mains Input
• Water Resistant Seal
• INPUT: 180 / 200 / 220 / 240 Volts A.C. internally selectable with push-on terminals
• WEIGHT: 4.33 Kg
• ENCLOSURE: 190 x 190 x 100. To IP 54.
• OUTPUT CONNECTION: 2 external insulated thumb screw terminals.
• Protection to 124 degrees Celsius non re-settable type on mains input.
• OUTPUT PROTECTION: 15 Amp Quick Blow Fuse (short circuit protection). Thermal overload
• INPUT PROTECTION: 1 Amp Anti-Surge Fuse.
• OUTPUT: 9 Amps at nominal 12 Volts D.C.

---

Important!

• Before any installation or maintenance work please disconnect your system from the utility and ensure that it cannot be inadvertently re-connected!
• Keep enough insulation distance between the mounting screws and the internal components of power supplies. Please refer to case drawings.
• Keep any fans and ventilation holes free from obstructions
• Mounting orientation other than standard orientation or high ambient temperature may increase the internal component temperature and will require de-rating in output current. Please refer to the specification sheets to receive optimum mounting position and information on the de-rating curve.

Warning/Caution!

• Risk of electrical shock. All failures should be examined by a qualified electrician.
• Do not install power supplies in places with high moisture or near water
• Output current and wattage must not exceed rated values and specifications
• Do not install near fire or in areas of very high ambient temperatures
• The ground (FG) must be connected to earth ground