Power Supply 9A/ 14V/ 126W (Switch Mode)

Power Supply 9 Amp 14 Volt

With Switch Mode PSU (Power Supply Unit)

(Switching mode power supplies (SMPS) are designed to convert one form of electrical energy into another. A SMPS transfers power from a DC or AC source to DC loads while converting voltage and current)

150W single-output enclosed type power supply. 
Voltage Range: 85 ~ 264VAC 120 ~ 370VDC, Frequency Range: 47 ~ 63Hz

AC Current (Typ.) 3A/115VAC 1.7A/230VAC

---

Features

• Universal AC input/ Full Range
• Withstand 300VAC surge input for 5 seconds
• No load power consumption <0.5W
• High operating temperature up to 70°C
• Protection; Short Circuit/ Overload/ Over Voltage/ Over temperature
• Cooling by free air convection
• Compliance to IEC/ EN 60335-1 (PD3) & IEC/ EN61558-1, 2-16 for household appliences
• Operating altitude up to 5,000 meters
• Withstands 5G vibration tests
• High efficiency, long life and high reliability
• LED indicator for power on
• Over voltage catagory III
• 100% full load burn-in test

---

Important!

• Before any installation or maintenance work please disconnect your system from the utility and ensure that it cannot be inadvertently re-connected!
• Keep enough insulation distance between the mounting screws and the internal components of power supplies. Please refer to case drawings.
• Keep any fans and ventilation holes free from obstructions
• Mounting orientation other than standard orientation or high ambient temperature may increase the internal component temperature and will require de-rating in output current. Please refer to the specification sheets to receive optimum mounting position and information on the de-rating curve.

Warning/Caution!

• Risk of electrical shock. All failures should be examined by a qualified electrician.
• Do not install power supplies in places with high moisture or near water
• Output current and wattage must not exceed rated values and specifications
• Do not install near fire or in areas of very high ambient temperatures
• The ground (FG) must be connected to earth ground