Integrated Pulsation controller (24 Puls) 12V DC
Available
Integrated Pulsation controller, 12 volts DC.
Pulsator Controller with onboard power supply. Can run up to 24 Pulsators
Our integrated pulsation control unit are suitable for all types of animals (camels, cows, sheep & goats)
Pulsation Controllers are mechanisms to operate pulsators, either integral with a single pulsator (a self contained pulsator), or a system controlling several pulsators.
Improve the efficiency of your parlour by installing a pulsator controller to better manage your farms milking. Pulsation Controllers are a cost-effective way to run a string of pulsators in the parlour.
- Suitable for Simultaneous or cascade pulsation
- Plug into the mains instead of using a separate DC supply
- Configure rates and ratios to adjust pulsation according to milk flow.
- Water Resistant Seal
- Printed Circuit Board
- 12 V D.C. Input from Power Supply
- Mode Switch
- Speed Control
- 3 Outputs to spread vacuum loading with Simultaneous, Alternate and Cascade modes
- Within each pair, the outputs are always pulsed alternately. In Cascade mode, the vacuum demand is reduced.
- Each of the three pairs of outputs is capable of supporting up to 8 Lectron TL pulsators making a maximum of twenty four pulsators
- Can provide a choice of pulsation ratios and also has the facility to allow different pulsation ratios between the front and rear quarters
- Pulsation speed adjustable 30 to 120 pulses per minute
- Pulsation ratio adjustable from 30:70 to 70:30
- Additional option for different front/rear ratios & can be operated with 12Vdc or 24Vdc power supply units
- Automatic overload protection system built in which shuts down a pair of outputs should they become overloaded. Automatic reset occurs after 8 pulses and every 8 pulses thereafter until the fault is cleared. Input protection against reverse polarity is also provided.