Power Supply 3A/ 12V/ 36W (Switch Mode)
Available
3A/ 12V/ 36W Power Supply SMPS PSU (Power Supply Unit)
(Switching mode power supplies (SMPS) are designed to convert one form of electrical energy into another. A SMPS transfers power from a DC or AC source to DC loads while converting voltage and current)
Voltage Range: 85 ~ 264VAC 120 ~ 373VDC, Frequency Range: 47 ~ 63Hz
AC Current (Typ.) 0.7A/115VAC 0.42A/230VAC
Features
- Universal AC input/ Full Range
- Withstand 300VAC surge input for 5 seconds
- No load power consumption <0.2W
- High operating temperature up to 70°C
- Overload Protection type : Hiccup mode, recovers automatically after fault condition is removed
- Over Voltage Protection type : Shut down o/p voltage, re-power on to recover
- Cooling by free air convection
- Compliance to IEC/ EN 60335-1 (PD3) & IEC/ EN61558-1, 2-16 for household appliences
- Operating altitude up to 5,000 meters
- Withstands 5G vibration tests
- High efficiency, long life and high reliability
- LED indicator for power on
- 100% full load burn-in test
Important!
- Before any installation or maintenance work please disconnect your system from the utility and ensure that it cannot be inadvertently re-connected!
- Keep enough insulation distance between the mounting screws and the internal components of power supplies. Please refer to case drawings.
- Keep any fans and ventilation holes free from obstructions
- Mounting orientation other than standard orientation or high ambient temperature may increase the internal component temperature and will require de-rating in output current. Please refer to the specification sheets to receive optimum mounting position and information on the de-rating curve.
Warning/Caution!
- Risk of electrical shock. All failures should be examined by a qualified electrician.
- Do not install power supplies in places with high moisture or near water
- Output current and wattage must not exceed rated values and specifications
- Do not install near fire or in areas of very high ambient temperatures
- The ground (FG) must be connected to earth ground